|
Framing - Carpenter - Roofing
This list of tools is optional, but If you would prefer to bring your own,
here is the list I recommend for each main task. Also included are pictures of the tools
for your reference.
Clearly mark or identify your tools!
The Tool List: - Carpenter- Framing - Roofing
1
Good quality hammer
(or two). (See Note Below)
1 Utility Knife (With Blades)
1 Nail Apron with Hammer loop
or Small Tool belt
1 Tape measure
1 Quick Square
2 Carpenter Type Pencils
 |
Here is a complete kit:
Tool Belt :$ 10.00
Hammer: $ 19.00
Tape Measure: $ 10.00
Utility Knife: $ 4.00
Quick Square: $ 6.00
___________
All for about $ 50.00
|
Primary Hammer - Framing |
Round Milled Face
Used for all of the framing and sheeting. |
Roofing Hammer |
Flat Milled Face
Cutting Blade
Roofing Gauge
Most of the time, air powered
roofing nailers are used and these have little use. But just
in case, its a good choice.
|
A
special note about hammers.
Many groups bring inexpensive, light weight
hammers. Will the cheap hammers work? Sure, but not nearly as well
as a hammer designed for the job. Building
these houses requires framing, drywall and roofing. I have illustrated the basic differences in the three types of hammers. If
you have one of these types, they will make your work much more fun, easier and faster.
1 Utility Knife (With Blades)
Framers, Quick Square
1 Nail Apron with Hammer Loop
(Home
Depot $4.00)
The advertising names change depending where you buy this.
You can ask some supplies if they have promotional version for free!
1 Tape measure
| 
